ESP8266 series module based on the ESP8266 ultra-low power UART-WiFi module module, you can easily secondary development, access to cloud services, mobile phone 3 / 4G global control anytime, anywhere to accelerate product prototyping.
Module Core Processor The ESP8266 integrates the industry-leading Tensilica L106 ultra low power 32-bit micro MCU in a smaller package with 16-bit lean mode with 80 MHz and 160 MHz support for RTOS, integrated Wi-Fi MAC / BB / RF / PA / LNA, onboard antenna. Support the standard IEEE802.11 b / g / n protocol, complete TCP / IP protocol stack. Users can use this module to add networking capabilities to existing devices, or to build standalone network controllers.
The ESP8266 is a high-performance wireless SOC that provides maximum practicality at the lowest cost, providing unlimited possibilities for WiFi systems to embed other systems.
Features
802.11 b / g / n
Built-in Tensilica L106 ultra-low power 32-bit micro-MCU, clocked at 80 MHz and 160 MHz support RTOS
Built-in 10 bit high precision ADC
Built-in TCP / IP protocol stack
Built-in TR switch, balun, LNA, power amplifier and matching network
Built-in PLL, regulator and power management components, 802.11b mode +20 dBm output power
A-MPDU, polymerization of A-MSDUs and protection intervals of 0.4 s
WiFi @ 2.4 GHz, support WPA / WPA2 security mode
Support AT remote upgrade and cloud OTA upgrade
Support STA / AP / STA + AP work mode
Support for Smart Config features (including Android and iOS devices)
HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
The deep sleep hold current is 10 uA and the shutdown current is less than 5 uA
Wake up within 2 ms, connect and pass the packet
Standby power consumption less than 1.0 mW (DTIM3)
Operating temperature range: -40 ℃ - 125 ℃