KR2202-4 Remote Control Switch AC 220V 2CH Relay Receiver Module + 2Pcs RF 433Mhz Wireless Remote Controls
Description:
Features:
100% brand new and high quality.
Momentary Mode:
- Push the remote button, the relay activates, release the remote button the relay deactivates.
Toggle Mode:
- Push and release the remote button , the relay activates.
- Push and release the remote button again and the relay deactivates.
Clearing All Stored Transmitters:
(Note: After clearing the stored transmitters, all transmitters will need to be relearned by the receiver.)
- Push the learning button on the receiver 8 times, and the codes will be cleared .
Learning the transmitter: ( Momentary Mode )
Programing a 2 button transmitter as momentary mode transmitter.
STEP 1
- Push and release the learning key on the receiver ONCE.
- Wait for a moment, the LED will turn off , indicating you entered the learning state.
STEP 2
- Push and release the first button on your transmitter, the LED on the receiver board will flash on then off indicating the button was learned.
STEP 3
- Press and release the second button, watching the LED go on and off again.
- Wait 3 seconds, the LED will turn on again , indicating system is ready for use.
Learning the transmitter: ( Toggle Mode )
- Programing a 2 button transmitter as toggle.
STEP 1
- Press and release the learning key on the receiver TWICE.
- Wait for a moment , the LED will turn off, indicating you entered the learning state.
STEP 2
- Press and release the first button on your transmitter, the LED on the receiver board will flash on then turn off.
- Indicating the button was learned.
STEP 3
- Next press and release the second button, watching the LED go on and off again.
- Wait 3 seconds, the LED indicator will turn on again, indicating system is ready for use
**Notice**
two button transmitters can only be used as toggle or momentary.
One mode per 2 button transmitter.
(Please note: You let the control panel to learn the remote control, you must press the "A" and "B" button; Rather than just pressing one of them )
However you can program another transmitter in the other mode.
Specifications:
Model: KR2202-4
Material: Plastic + Metal
Color: Black
Dimension of PCB: (L×W×H) 35×30×18mm/1.38×1.18×0.71in (Approx.)
Input Power: AC 85V-250V
Standby Current: <8.5MA
RF Frequency: 433M
RF working mode: superheterodyne
Receive sensitivity: > 97 dbm
Transmitting distance: More than 15 meters
Decoding mode: MCU software decoding
Learnable Transmitters: 1-16 transmitters
Support remote type: Learning code(1527)
Switching Modes: Both Momentary & Toggle
Wiring type: fixed terminal
Switch Output: normally open & normally closed
Wire port:
NO: normal open
COM: common
NC: normal close
Quantity: 1 Set (other accessories demo in the picture is not included)
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 X Remote Switch Receiver Module (KR2202-4) (include Shell) (No retail package)
2 X Remote Control (include battery)