Package Includes:
1pcs * Banana Pi M1+
Hardware Specification of Banana Pi M1+
Soc: Allwinner A20
CPU: ARM Cortex-A7 Dual-Core 1 GHz (ARM v7 instruction set)
GPU: Mali400MP2 Complies with OpenGL ES 2.0/1.1 (hardware acceleration support)
SDRAM: 1GB DDR3(shared with GPU)
Power: 5V/2A via MicroUSB (DC in Only) and /or Micro USB (OTG)
PMU: AXP209
Features
Low-level perpherials: 40 Pins Header ,
28xGPIO,some of which can be used for specific functions including UART,I2C,SPI,PWM,CAN,I2S,SPDIF,LRADC,ADC,LINE-IN,FM-IN,HP-IN
On board Network: 10/100/1000Mbps ethemet(Realtek RTL8211E/D)
Wifi Module: Wifi 802.11 b/g/n
Bluetooth: Optional
On board Storage: Micro SD(TF) Card,SATA 2.0
Display: Supports multi-channel HD display:
HDMI 1.4 (Type A -full)
LVDS/RGB/CPU display interface (DSI) for raw LCD panels
Composite Video(PAL and NTSC)(via 3.5mm TRRS jack shared with audio out)
11 HDMI resolutions from 640x480 to 1920x1080 plus various PAL and NTSC standards
Video: HD H.264 2160p video decording
Multi-format FHD video decording,including Mpeg 1/2 ,Mpeg4,H.263,H.264,ect H.264 high profile 1080p@30fps or 720p@60fps encording
Audio outputs: HDMI ,analog audio(via 3.5mm TRRS jack shared with composite video out),I2S audio (also potentially for audio input)
Camera: Parellel 8-bit camere interface
Audio input: On board microphone
USB: 2USB 2.0 host,1 USB 2.0 OTG (all direct from A20 chip)
Buttons: Reset button
Power button
U-boot button
Leds: Power status led(red)
User defined led1(green)
User defined led2(blue)
Other: IR receiver