Technical Data:
Model Number: RYC-1201-30A
Working Voltage: DC 12V - 72V.
Working Frequency: 433Mhz.
Modulation Mode: ASK.
Receiving Sensitivity: -107dBm.
Working Temperature: -20~+70.
Max Load: 30A Relay, Resistive load≤25A, Inductive load≤20A.
Transmitting Distance: 20 -50 Meters Indoor, 50-100 Meters In Open Space.
Function Option: Momentary / Toggle / Latched.
Matching Mode: Intelligent Learning Code.
Output Mode: Dry Contact /Voltage Output.
Learnable Transmitters: 1-25 transmitters .
Dimension: 85.3x43.6x30.2(mm).
Specifications Of The Remote Control:
Operating frequency: 433.92MHz
Power by 3V*2 Coin Cell Button Battery(Battery included ),
Material: PVC.
Button: 2 button;
Size: 55mm x 30mm;
Operating voltage: 3V ;
Operating Current: 12mA;
Transmitting power: 10mw;
Modulation mode: ASK (AM).
Encoding type: Learning;
Transfers distance: 80m
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Clearing the code :
Push the learning button on the receivers for 9 times , the codes will be cleaned .
After clearing the code, all the remote control can not work any more.
Learning the code :(momentary)
Press
the learning key(on the Receiver) once time, the LED (on the
Receiver)will blink one time. When the LED is on, press the button of
the remote control(You want to let it learn), the LED (on the
Receiver)will blink for 3 times and then turn off, Learning to succeed.
Learning the code : ( Toggle )
Press the learning key(on the Receiver) 2 times, the LED (on the Receiver)will blink 2 times.When
the LED is on, press the button of the remote control(You want to let
it learn), the LED (on the Receiver)will blink for 3 times and then turn
off, Learning to succeed.
Learning the code :( Latching )
Note:
When you choose for latching mode , in order to learn more remote
control , you need to learn two different button , the first time learnt
is for "ON", the second time learnt for "OFF".
For example : button A = ON , button B = OFF
Press
the learning key(on the Receiver) 3 times, the LED (on the
Receiver)will blink 3 times. When the LED is on, press the button of the
remote control(You want to let it learn), Push the remote button A, LED
flash for 3 times . Push the remote button B, Led flash for 3 times .
After 3 seconds , the LED indicator will be off , Learning to succeed.
A = ON , B = OFF .
NOTE 1:
The
system can store for 25 pcs of remotes , if the remote get more than 25
pcs , the receiver will stop working or not working properly.
NOTE 2:
The
receivers in our store are mainly used together with the related
products in our company. If you want to use your own transmitter, please
confirm if the operating frequency, chip type and vibration resistance
of your transmitter are in accordance with ours. If not, they will fail
to match.
NOTE 3:
1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.
2.
Please promptly change battery when remote control voltage is
insufficient, (when the battery voltage is insufficient, generally get
close transmitting )
3.
Please pay attention to avoid metal mask,large equipment ,strong
interference electromagnetic filed when using wireless RF products,and
avoid too short distance between the remote control and receiver board .
4.
Please avoid abnormal using of the product.Abnormal using will reduce
product performance and life, when seriously it may damage the products
and even make danger for your safe .